1 Topic by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Topic: ED3 Aero

A while back someone asked what was next for the ed3V6 well here it is .
available as a complete unit or a upgrade pack for those of us that have an ed3v6 and titan

http://e3d-online.com/titan-aero-hot-end-extruder

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

2 Reply by heartless (edited by heartless 2017-03-25 02:13:05)

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: ED3 Aero

Tin, I know you mean well, but it is E3D - not ED3 tongue

and yeah... very interested in the Aero!

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

3 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: ED3 Aero

I sit corrected. Been a long week and my mind is on building a printer LOL.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

4 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: ED3 Aero

A larger squared  heatsink with a lower profile without sacrificing height...kind of a mashup of v6 with Chimera. I own many printers, but as an avid SD2 user, this seems worth the investment especially when using a Volcano.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

5 Reply by wagnmkr

  • wagnmkr
  • Member
  • Offline
  • From: Lindsay, Ontario, Canada
  • Registered: 2016-07-16
  • Posts: 110

Re: ED3 Aero

Thanks for the link Tin. That looks interesting.

I was cut out to be rich ... but ... I was sewn up all wrong!
Wanhao Duplicator I3 Plus with glass bed, MK10 All Metal Hot End

6 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: ED3 Aero

Am thinking i will order a couple of the upgrade kits.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

7 Reply by edward4000

  • edward4000
  • Member
  • Offline
  • From: UK
  • Registered: 2013-05-22
  • Posts: 11

Re: ED3 Aero

Looks great Tin,  could I retro fit this to my CTC printers???

edward4000's Website

8 Reply by pap4tinker

  • pap4tinker
  • Member
  • Offline
  • Registered: 2017-02-14
  • Posts: 82

Re: ED3 Aero

So this is the whole direct drive set up correct? Could on implement it on a Bowden type extrude bypassing the Bowden feed? Or you must have a stepper motor to attach to the new end?

9 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: ED3 Aero

The  Aero Is indeed a direct drive extruder /hot end combo. the integrated the heat sink as the cover for a titan  extruder and then added a larger fan to cool it.
To use as a bowden you would have to use a regular titan cover attache the titan to the motor and then figure out how to mount the heat sink on the gantry.
for bowden I would think a regular e3d cylinder heat sink and small fan hot end would serve you better.

Looks great Tin,  could I retro fit this to my CTC printers???

I would think so you may want to ask the folks at E3D
And yes I have the upgrade kits one aero is installed on the new kit build.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura