Topic: This was pointed out to me today
http://micron3dp.com/collections/all-me … ible-combo
now for that price it better bake scones and tea
but it looks good
- carl_m1968
- Member
- Offline
Re: This was pointed out to me today
Manx wrote:
http://micron3dp.com/collections/all-me … ible-combo
now for that price it better bake scones and tea
but it looks good
I can hear my X motor screaming under the sheer weight.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: This was pointed out to me today
Someone already came up with an extruder that uses a flex hose to transfer the energy directly to the hotend without putting all that weight on a delta printer's effector.
http://mutley3d.com/Flex3Drive/
You could also make one yourself for less than it costs to buy one.
Re: This was pointed out to me today
what about duel extrusion and cooling fan? something needs thrown in as bonus at that cost!
Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs
- heartless
- Member
- Offline
Re: This was pointed out to me today
just how do they figure that is a "compact design"??? doenst look very compact to me... just sayin...
SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1