1 Topic by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Topic: Where are most Da Vinci owners located?

I ask mainly as myself being in the US central time, I never see active posters. They all post in the morning before I wake up and a few around midnight my time. Then I see posters that make a post but never seem to wait for a reply. Sometimes a day more may go by before they come back with a response.

Maybe its me but when I post a qustion as I have before I check about each hour to 30 minutes for responses. But as I said it does not seem as though as there are any active posters from the US in the evenings when you would expect them to be most active. I feel as though I am the only Da Vinci owner in the US.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

2 Reply by okcazure

  • okcazure
  • okcazure
  • Member
  • Offline
  • From: Dayton, OH
  • Registered: 2015-02-21
  • Posts: 15

Re: Where are most Da Vinci owners located?

I'm in the US...  Dayton, OH area to be exact.  Of course I normally only check for new posts in the morning before work, after work, and then before bed...

3D Printing since January 2015
https://www.thingiverse.com/okcazure/designs
Printer: Prusa MINI+
Previous printer: DaVinci 1.0

okcazure's Website

3 Reply by Dominick

  • Dominick
  • Dominick
  • Member
  • Offline
  • From: Covington, GA
  • Registered: 2014-12-07
  • Posts: 83

Re: Where are most Da Vinci owners located?

I live in Covington, GA United States.  Everyone over here has no flipping idea what "3D printing" means or what it is...

Da Vinci 2.0 with Repetier Firmware (Printing in ABS/PLA/Exotics)
12 Years PC Experience
16 years old

4 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Where are most Da Vinci owners located?

So there are a few, just lurking for the most part.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

5 Reply by kev0175

  • kev0175
  • Member
  • Offline
  • Registered: 2015-02-17
  • Posts: 146

Re: Where are most Da Vinci owners located?

I'm here ......... Form Prairieville La. I check the forum pretty often.

Da Vinci  AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter,  Installed a Extruder Controller for higher temps

6 Reply by madmike8

  • madmike8
  • Member
  • Offline
  • Registered: 2014-12-30
  • Posts: 37

Re: Where are most Da Vinci owners located?

Tennessee

7 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Where are most Da Vinci owners located?

Ok, there are more. I'm from Dallas myself. It just seems that after 7 pm when I would expect active posting this place is a ghost town.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

8 Reply by PseudoShooter

  • PseudoShooter
  • PseudoShooter
  • Member
  • Offline
  • From: Windsor, Ontario.
  • Registered: 2015-02-07
  • Posts: 194

Re: Where are most Da Vinci owners located?

Windsor, ON (right across from downtown Detroit)

Win 8.1
Improved Da Vinci 1.0 with Firmware 1.2.5 and stock extruder
Arduino cartridge resetter and after-market ABS filament
TinkerCAD, Netfabb, Simplify3D

9 Reply by Leghk

  • Leghk
  • Leghk
  • Member
  • Offline
  • Registered: 2013-02-18
  • Posts: 172

Re: Where are most Da Vinci owners located?

Seattle, WA, approximately.

Don: Folger Tech 2020 Kossel Rev A + Borosilicate + Snow Effector
        Davinci 1.0 + Repetier : Filastruder
        SD3 + RAMPS + Lawsy Carriages + E3D + Borosilicate + ... : Cupcake

10 Reply by evanalmighty

  • evanalmighty
  • Member
  • Offline
  • Registered: 2015-01-04
  • Posts: 224

Re: Where are most Da Vinci owners located?

SoCal

11 Reply by mpoffo

  • mpoffo
  • Member
  • Offline
  • From: Milwaukee WI Area
  • Registered: 2014-12-09
  • Posts: 184

Re: Where are most Da Vinci owners located?

Milwaukee WI area

DaVinci 1.0A with Repetier .92
Simplify 3D
E3DV6

12 Reply by tonyno

  • tonyno
  • Member
  • Offline
  • Registered: 2014-12-23
  • Posts: 135

Re: Where are most Da Vinci owners located?

Chicago!

13 Reply by rockosmodlife

  • rockosmodlife
  • rockosmodlife
  • Member
  • Offline
  • From: The Woodlands, TX
  • Registered: 2014-12-05
  • Posts: 87

Re: Where are most Da Vinci owners located?

Houston

Repinci 1.0 + Repetier host

14 Reply by Oldsirhippy

  • Oldsirhippy
  • Member
  • Offline
  • Registered: 2015-01-17
  • Posts: 45

Re: Where are most Da Vinci owners located?

Jersey - the original one.

15 Reply by camolito

  • camolito
  • Newbie
  • Offline
  • Registered: 2015-01-21
  • Posts: 8

Re: Where are most Da Vinci owners located?

Savage, MN (Suburb of Minneapolis).  I don't do much if any posting, but often read to find new tips, tricks, and advice.

16 Reply by kszwab

  • kszwab
  • Member
  • Offline
  • Registered: 2014-07-31
  • Posts: 115

Re: Where are most Da Vinci owners located?

Houston, TX

17 Reply by galaxy99

  • galaxy99
  • galaxy99
  • Member
  • Offline
  • Registered: 2015-02-14
  • Posts: 115

Re: Where are most Da Vinci owners located?

Portland, Oregon

Mac OSX ElCapitan
Prusa i3 (two built from kits), 1 hacked DaVinci
Solidworks for models, Netfabb to repair, Repetier/Slic3r and Simplify3D

18 Reply by darcwarrior

  • darcwarrior
  • Member
  • Offline
  • Registered: 2014-12-14
  • Posts: 29

Re: Where are most Da Vinci owners located?

South Pasadena, CA.

I am active mostly at night and weekends but just not logged in until I see something I can chime in.

19 Reply by scobo (edited by scobo 2015-05-12 18:53:38)

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Where are most Da Vinci owners located?

Jeez, turns out there's quite a few of you from the states.
I would wager I'm the only Da Vinci poster here from Scotland though .....

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

20 Reply by robertf

  • robertf
  • Member
  • Offline
  • Registered: 2015-04-08
  • Posts: 78

Re: Where are most Da Vinci owners located?

Dallas

If the rest of the Da Vinci users are like me, they are near a microcenter so they can exchange the 1st DOA for a good one.

I'm 2 for 4

21 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Where are most Da Vinci owners located?

Well carl you are looking at at a small sub set:
3d printer ownerers
Davinci owners
Davinci owners in the USA
Davinci owners that are active posters here
and finally  a small time segment.
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

22 Reply by jasonthorn82

  • jasonthorn82
  • Member
  • Offline
  • Registered: 2014-08-12
  • Posts: 12

Re: Where are most Da Vinci owners located?

Salem, Oregon

23 Reply by aestheticus

  • aestheticus
  • Member
  • Offline
  • Registered: 2015-01-12
  • Posts: 22

Re: Where are most Da Vinci owners located?

Orlando, Fl

24 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Where are most Da Vinci owners located?

Well looks like most are from the states after all. They all just have off times of viewing and responding.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

25 Reply by madmike8

  • madmike8
  • Member
  • Offline
  • Registered: 2014-12-30
  • Posts: 37

Re: Where are most Da Vinci owners located?

I usually check in a few times a day, but since I'm still all stock on my davinci I don't have much to add.

I still read up on all the mods/hacks as I'm sure XYZ is going to screw up enough for me to make the move someday...