1 Topic by OneMoreCast

  • OneMoreCast
  • OneMoreCast
  • Member
  • Offline
  • From: Long Island, NY
  • Registered: 2015-01-02
  • Posts: 334

Topic: Bed Stabilizer for SD2,3,4 and apprentice

http://s1.postimg.org/ry8eubwuz/image.jpg

http://s1.postimg.org/odcjb3sbf/image.jpg

http://www.thingiverse.com/thing:698422

After seeing pic on here and the OP didnt have STL's I decided to build my own off his pics. The left arm is shorter on purpose to allow hinge to clear on SD4 and have door fully close. Enjoy, let me know what you think and what changes should be made.

Cheers

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

OneMoreCast's Website

2 Reply by OneMoreCast

  • OneMoreCast
  • OneMoreCast
  • Member
  • Offline
  • From: Long Island, NY
  • Registered: 2015-01-02
  • Posts: 334

Re: Bed Stabilizer for SD2,3,4 and apprentice

Updated files...redesigned blocks, added a pair of short and lomg arms and split them up. Due to printer comfigs (y brackets, carriages, printheads etc. wanted this as best for all as possible)

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

OneMoreCast's Website