Topic: DaVinci 2.0_Newbe_extruder jams
Got a 2.0 for Christmas, set up and test print (downloaded stl file) went fine.
Have tried three times with two different extruder heads to print a 120mm diameter dish, both heads jam after a few min...cleaned per xyz procedure, reloaded filament...jam after the same amount of time again.
Any ideas?
Using stock software
created my own object at thinguniverse saved as .stl
loads fine, prints the test strip or whatever that line it prints is on the side.
im cleaning the platter with water and microfiber cloth between.
fresh glue each time.
trying to be patient , lol
Help?
Latest Stock Software
XYZ ABS only
1st print 12/26/14