Topic: How long will it take to dry out my filament?.
I started having my nozzle jamming and it was happening with 2 different spools. After taking apart the nozzle and soaking it in acetone and cleaning it out, I tested both spools and there was bubbling every few mm's so I figured it had absorbed moisture.
Long story short, I now have the 2 spools in a storage tub with a 100w bulb in it and a can of damprid. Inside the container it is about 100° F(38° C) and humidity 16%. About how long should I wait to try to use the filament?
Thanks.