Topic: printrbot announce new all metal printrbot plus
what do people thnk ?
http://makezine.com/2014/11/21/check-ou … rbot-plus/
SD2 - mirror bed - e3d v6 - extruder cooling fan - no enclosure.
Re: printrbot announce new all metal printrbot plus
heated bed, dual all metal hot ends for £1299. I think a shot just got fired across the bow of SD WB
SD2 - mirror bed - e3d v6 - extruder cooling fan - no enclosure.
Re: printrbot announce new all metal printrbot plus
its not duel extruder. and the link shows a single extruder mandel type for $999. where did you see the higher prince?
Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs
- Tin Falcon
- Member
- Offline
Re: printrbot announce new all metal printrbot plus
its not duel extruder. and the link shows a single extruder mandel type for $999. where did you see the higher prince?
Same link you are both right single extruder no heatbed $999
dual extuder and heat bed $1299.
Tin
Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura
- grob
- Member
- Offline
Re: printrbot announce new all metal printrbot plus
Moving bed I'm not so sure about. Makes it a bit bulky to enclose for cooking up ABS.
Otherwise I'm loving the sheet metal construction and clean lines!
SD3. Mk2b + glass, heated enclosure, GT2 belts, direct drive y shaft, linear bearings, bowden-feed E3D v5 w/ 0.9° stepper
Smoothieboard via Octoprint on RPi
Smoothieboard via Octoprint on RPi