1 Topic by Jaeg

  • Jaeg
  • Member
  • Offline
  • Registered: 2013-05-17
  • Posts: 28

Topic: LCD Ribbon Cable

Has anyone found a site to purchase the LCD ribbon cable that comes damaged from the factory.  I am looking to sell my Da vinci and hopefully pick up the new DUO or all in one.  I fixed the cable myself, but I want to replace it before selling it so its not a possible issue for the new owner once I sell it.  I cannot seem to find the cable in the proper length.

thanks in advance.

Tim

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: LCD Ribbon Cable

A picture  ?? I expect any supplier that deals in electronics of 3d printing supplies would have something. but Not knowing what you have can not say for sure.
Alied and newark both have huge catalogs.
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by JPB

  • JPB
  • Newbie
  • Offline
  • Registered: 2014-05-23
  • Posts: 3

Re: LCD Ribbon Cable

Mine arrived with a damaged cable. It took a bit of patience and persistence but XYZ posted me a replacement ribbon cable.

4 Reply by dubbsd

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Re: LCD Ribbon Cable

led ribbon cable @ Amazon.com
http://www.amazon.com/s/ref=nb_sb_noss_ … led+ribbon

Ultimaker S3.

5 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: LCD Ribbon Cable

dubbsd wrote:

led ribbon cable @ Amazon.com
http://www.amazon.com/s/ref=nb_sb_noss_ … led+ribbon


The OP said LCD, not LED. The printer has an LCD panel and button pad. Due to the way the cable wa routed many got damaged during shipping. It is a wide very flat cable. I will do some digging since I am a tech for a large company and see if I can source one. If the OP could post a photo of the connection on the LCD side it would help as I do not want to open mine up again.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.