1 Topic by ricksouza87

  • ricksouza87
  • Newbie
  • Offline
  • Registered: 2014-10-27
  • Posts: 2

Topic: Extrusion doubt about the uPrint SE

Hello, I would like to know if anyone has had the same situation as me. I was talking to a lab at the university where I study who bought a 3D printer uPrint SE. But they want to use different polymers with different temperatures for extrusion. However, we do not know how to do that exactly.

Should we try to access the part of the configuration file to change the temperature of the extrusion of new polymers or there is some other way to do this?

Thanks for any help!

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Extrusion doubt about the uPrint SE

good luck. That machine is very  closed. that is not  open for tinkering and set up fro ABS only .
Manual here is you do not have one http://ilab.engr.utk.edu/iLabDocs/uPrint/en_guide.pdf
In an attempt to make things easy the expensive printers take away control.
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by ricksouza87

  • ricksouza87
  • Newbie
  • Offline
  • Registered: 2014-10-27
  • Posts: 2

Re: Extrusion doubt about the uPrint SE

Even if I have access to the operating system by changing the settings manually you believe that the changes could affect the operation of the printer? Or that changes would not effect the right way?