Topic: Granulatiing plastic
Anyone seen any grinders besides Marcus Thymarks and the filabot reclaimer?
My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Filastruder → Granulatiing plastic
Anyone seen any grinders besides Marcus Thymarks and the filabot reclaimer?
There are tons of plastics/non metal grinders out there... unless you mean specifically designed for grinding 3d printing plastics? Do a search for commercial grinders and you will find some very good designs and if you check the equipment auctions every month there are always a few that go pretty cheap and are still quite serviceable albeit not pretty or new.
Are these commercial machines at $1000 plus?
at the auctions they can go as low as 50 bucks for machines that cost many thousands of dollars when new, it's all about looking in the right place at the right time... it's actually amazing how some of the bigger stuff can go as cheap as it does... as long as there isn't a scrap buyer looking at stuff as that can drive prices up.
Trouble with industrial granulators is that they're typically at least 220v, usually 3 phase.
^^ yes, quite a few are 220/208/480 3ph but I have switched motors before on all kinds of machinery, just up the hp about 20-30 percent for the torque loss if you want equivalent power... however for the type of material we are dealing with you wouldn't need the designed power in fact just running a phase converter and taking a hit on power with the 3ph motor would more than likely be sufficient.
I have one of those "will it blend?" blenders (the guys that blend all kinds of electronics like iPads) made by Blendtech. It's a fabulous blender, and I wouldn't want to try my food blender with plastic, but I have been curious if it would work...any bar or smoothie business should have one or a competing brand (which I can't remember the name of), and they replace them fairly often. I'm going to ask my local watering hole if they've got an old pitcher I can buy, then I won't have to worry about the food thing.
Morbid tip: If you're looking for an industrial grinder, call around to your local crematory (pet or human) and see if they have an old one to sell. (That's how they make the ashes.)
The only reason I stopped with my kitchen blender was that it tore apart the plexi glass bucket. The shredding action was actually ok. To a blender with a glass bucked will do that job well.
I also asked the guys from the perpetual plastics project and they will offer a shredder in the 400$ range as well in the future.
What I also found out was that if you melt you plastic on a baking sheet you get it thin enough for you kitchen blender to be able to work it. Its hellishly loud and you need a sturdy glassbucket but for the lowcost version it will do.
Pics here: http://printnewworlds.blogspot.nl/2014/ … -test.html
I sourced a granulator for quite cheap. Thanks for your suggestions!
SoliForum - 3D Printing Community → Filastruder → Granulatiing plastic
Powered by PunBB, supported by Informer Technologies, Inc.