1 Topic by joken6309

  • joken6309
  • Newbie
  • Offline
  • Registered: 2014-03-24
  • Posts: 2

Topic: Help please.

Hi we received our filastruder number 966.  There are no written instructions per say, but found the online instructions which are helpful to a degree.  The kit came with the Sestos d1s-2r-24 pid.  I can't find any references to wiring it.  I've wired other controllers with other extruders including one I made myself, so not a complete moron here.  Please, any help will be appreciated.  I also note that it did not come with an ssr which my others have. 

Thank you
Ken

2 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: Help please.

It comes with a letter that provides a link to the written instructions. This is done so I can update instructions on the fly, making for a better end-user experience.

Figure 1 in the wiring diagram shows how to do the wiring, and it has step by step directions below.

No SSR is needed, the controller has a conventional relay on board.

Let me know if you have specific questions.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

3 Reply by joken6309

  • joken6309
  • Newbie
  • Offline
  • Registered: 2014-03-24
  • Posts: 2

Re: Help please.

Ok sorry for that.  I didn't scroll down far enough, yes an ID 10 T error on my part.  Thank you for responding so quickly.

Ken