1 Topic by WhiteStar01

  • WhiteStar01
  • Member
  • Offline
  • Registered: 2012-10-29
  • Posts: 59

Topic: No Live Filament view in Repetier

Anyone else have no live view of the extruder progress on the manual control tab?  Once in awhile mine shows the filament but more often than not, the bed view is empty.  Tried toggling hide filament, view from top etc etc- still totally random.

Cheers

2 Reply by IanJohnson

  • IanJohnson
  • Moderator
  • Offline
  • Registered: 2012-08-07
  • Posts: 2,815

Re: No Live Filament view in Repetier

Is it still showing in the gcode editor?

3 Reply by WhiteStar01

  • WhiteStar01
  • Member
  • Offline
  • Registered: 2012-10-29
  • Posts: 59

Re: No Live Filament view in Repetier

Yep no issues there at all.  Just the live view.

4 Reply by WhiteStar01

  • WhiteStar01
  • Member
  • Offline
  • Registered: 2012-10-29
  • Posts: 59

Re: No Live Filament view in Repetier

Hmm I just noticed- looks like something to do with bed height.  Although this print is completely normal- it doesnt start showing in live view until the print us up many layers, showing that layer as flush with the bed.  The print pictures is actually joined to the tips (cube looking things) but live view has the bed showing up many layers into the print.  Odd.

Post's attachments

Capture.PNG
Capture.PNG 191.07 kb, 2 downloads since 2012-11-15 

You don't have the permssions to download the attachments of this post.