1 Topic by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Topic: 2n2r5 Printed Parametric Spool - V1.1

http://2n2r5.com/pictures/printer/show-n-tell/spoolHubs.png

A couple features that I was shooting for:

Entirely printable (including center hub)
Interlocking connection in center of hub
Ability to change inside and out side of hub seperately
Tapper ability for both inside and outside of hub
low amount of plastic used - (teardrop cutout can be turned on and off)
filament holes to hold during spooling then to tie loose end

*By Request
- Sides are Symmetrical

See file for change log and up coming feature notes.

Post's attachments

spoolHubs.scad 4.94 kb, 5 downloads since 2013-07-11 

You don't have the permssions to download the attachments of this post.
SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

2 Reply by CraigRK

  • CraigRK
  • CraigRK
  • Member
  • Offline
  • From: Surrey, United Kingdom
  • Registered: 2013-03-12
  • Posts: 102

Re: 2n2r5 Printed Parametric Spool - V1.1

2n2r5 wrote:

*By Request
- Sides are Symmetrical

See file for change log and up coming feature notes.

Great, that was quick!!!

Masterbatch, ABS and PLA Pellets available for UK and Europe.
http://www.emakershop.com/Seller=1324

CraigRK's Website

3 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: 2n2r5 Printed Parametric Spool - V1.1

CraigRK wrote:
2n2r5 wrote:

*By Request
- Sides are Symmetrical

See file for change log and up coming feature notes.

Great, that was quick!!!

It was a fairly easy change. I just cleaned up my code so it was quite simply a copy/paste. Only a couple other adjustments were needed for spacing.  :-)

Let me know if you have any other requests. I am looking into a few more additions before uploading it to thingiverse.

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website