Topic: Women's Handbag
Because I made a wallet, my girlfriend asked me to make her a handbag. This will be her first print on her very own Prusa so I couldn't refuse the challenge. I have a couple proof of concepts that I would be grateful if someone else could try. They have worked for me but I don't want to rely on my results. If someone could try the zip-lock sample here. It shouldn't take but 5 min max to print.
The press lock connection should push together and snap in place. To remove you should have to separate the attached sheets causing an angle to release the bond easily. It should be difficult almost to the point of breaking the plastic to try to remove pulling straight out.
This is just part of a much larger file. I will update this as I get more ready.
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.