Topic: Solidoodle stopped working
LAst night I printed my first test, and after that I turned the printer off by unplugging the AC cord from the power supply.
Tonight, I plugged the power supply cable in, but the printer doesn't respond at all to any commands. I tried unplugging the USB cable and I can hear the USB Plug N Play connection sound, I can also see the USB serial port device loading in the device manager, but the printer does absolutely nothing.
If I click any of the manual controls it appears to send the command, but nothing happens.
I looked at the back of the unit and there's red LED in the upper left corner next to a connector marked "E". Something else I noticed, which I didn't pay attention the other day, is that the power brick LED iv very faint, and it's only lit if the USB cable is connected to the computer, otherwise it's off.
So what could be wrong with this thing?
SD3 printer w/too many mods, Printrbot Simple Maker Ed., FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.