1 Topic by ostapf

  • ostapf
  • Newbie
  • Offline
  • Registered: 2019-03-02
  • Posts: 1

Topic: For all owners of CTC SLA Riverside printer. Conversion to Formlabs.

Hi! As you may know CTC SLA Riverside printer is fully hardware clone of Formlabs Form1/Form1+ SLA Printer.
I managed to launch this printer on the original firmware from Formlabs.
And now CTC SLA Riverside 3D printer is fully usable with Formlabs PreForm software.

If you want to try to flash Formlabs firmware to your printer you can find all information by this link: https://void.in.ua/ctc/

WARNING! After you flash it is not possible to get back to CTC firmware. You are doing it on your own risk!

2 Reply by mpcom2000

  • mpcom2000
  • Newbie
  • Offline
  • Registered: 2023-03-14
  • Posts: 1

Re: For all owners of CTC SLA Riverside printer. Conversion to Formlabs.

Link is not yet available, do you have another copy? Thanks