1 Topic by mohammadnyzia

  • mohammadnyzia
  • Newbie
  • Offline
  • Registered: 2022-01-04
  • Posts: 9

Topic: Accidentally bricked Da Vinci 1.0 Pro - need to restore firmware.

I've looked everywhere and I cannot find a way to reset the firmware. When I connect the printer to my computer, no device is detected in the device manager (Windows). The pro doesn't seem to have the jumper pins like some of the other XYZPrinters.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Accidentally bricked Da Vinci 1.0 Pro - need to restore firmware.

If firmware has crashed during a load it will not recognized by the PC. You have to use a bootstrap type programmer and the original BIN file. The Bootstrap programmer is a program called Bossac or something like that.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: Accidentally bricked Da Vinci 1.0 Pro - need to restore firmware.

Carl is right, the only problem is we don't have a decrypted firmware file for this printer.

How do you "accidentally bricked" it?

Please upload photos of your mainboard pcb.

4 Reply by mohammadnyzia (edited by mohammadnyzia 2022-01-06 05:04:44)

  • mohammadnyzia
  • Newbie
  • Offline
  • Registered: 2022-01-04
  • Posts: 9

Re: Accidentally bricked Da Vinci 1.0 Pro - need to restore firmware.

Firmware update failed as it was processing. Here is the picture of the mainboard.

Post's attachments

unnamed.jpg 1.67 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.