1 Topic by Harken

  • Harken
  • Newbie
  • Offline
  • Registered: 2021-04-30
  • Posts: 4

Topic: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

I recently received a da Vinci Junior 1.0w from a friend who didn't use it anymore. I have attempted to upgrade the firmware with tools on these forums but they are failing. The XYZ software also says no updates are available.
When I look at the firmware version, it says D.E.7, which appears to be some type of DEMO firmware. I contacted the company and they said that wasn't their firmware, so they couldn't offer any ideas other than that I'd have to buy a new board.

Does anyone have any ideas on how I could get an official firmware loaded onto the device or change it over to one of the other options?
Thank you!

2 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

Hello,

could you provide some photos of the mainboard?

3 Reply by Harken

  • Harken
  • Newbie
  • Offline
  • Registered: 2021-04-30
  • Posts: 4

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

modfreakz wrote:

Hello,

could you provide some photos of the mainboard?

I've attached a few photos of the mainboard. Thank you for your help!

Post's attachments

IMG_1771.JPG 2.45 mb, file has never been downloaded. 

IMG_1778.JPG 3.82 mb, file has never been downloaded. 

IMG_1780.JPG 3.46 mb, file has never been downloaded. 

IMG_1781.JPG 4.77 mb, file has never been downloaded. 

IMG_1782.JPG 4.24 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

4 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

Hi,

here is the Atmel dump   
https://my.hidrive.com/lnk/Vbimhxit

use this recovery mode, read here

http://www.soliforum.com/topic/17845/do … rmininano/

http://www.soliforum.com/topic/17927/xy … -firmware/

5 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

use/short SW6 to erase flash

6 Reply by Harken

  • Harken
  • Newbie
  • Offline
  • Registered: 2021-04-30
  • Posts: 4

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

modfreakz wrote:

use/short SW6 to erase flash

This worked perfectly! Thank you so much for your help and everything you do for the community.

7 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

You are welcome!

One more thing I forgot, you need maybe valid serial number.
Send me photo of the backside of the printer via private message.

I send you another file.

8 Reply by Harken (edited by Harken 2021-05-01 01:34:16)

  • Harken
  • Newbie
  • Offline
  • Registered: 2021-04-30
  • Posts: 4

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

modfreakz wrote:

You are welcome!

One more thing I forgot, you need maybe valid serial number.
Send me photo of the backside of the printer via private message.

I send you another file.


I opened the file you sent me with XYZ Firmware Converter and put in my serial number. I saved the Atmel dump from that program and uploaded that with BOSSA.

Is that the correct process or did I miss something that related to the serial number?

Thank you again for all your help.

9 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: upgrading da Vinci Junior 1.0w Demo firmware (D.E.7)

Ach, you did it already, very well!!