1 Topic by good_stamp

  • good_stamp
  • Newbie
  • Offline
  • Registered: 2020-11-03
  • Posts: 3

Topic: teflon tube da vinci mini W

Hi guys, someone can tell me why what I show you in the attached photo happens?

I can no longer print with any filament, either XYZ or from other manufacturers. What happens?

Post's attachments

teflon tube da vinci mini W.jpg 986.3 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: teflon tube da vinci mini W

good_stamp wrote:

Hi guys, someone can tell me why what I show you in the attached photo happens?

I can no longer print with any filament, either XYZ or from other manufacturers. What happens?

You just need to replace that compression fitting. They are cheap on Amazon. Just measure the outer and inner diameter and get the same size. They wear out after a while so get several.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by good_stamp

  • good_stamp
  • Newbie
  • Offline
  • Registered: 2020-11-03
  • Posts: 3

Re: teflon tube da vinci mini W

Tnx so much!