1 Topic by maikol_117

  • maikol_117
  • Newbie
  • Offline
  • Registered: 2020-07-10
  • Posts: 4

Topic: the thermistor does not heat HEEEEELP!!! :(

yesterday I assembled my filastruder I read the manual and saw some videos and I would assemble it well I would say. the problem is that when turning on the machine it does not heat and I do not think there is a button to start the temperature. check the manual and everything is fine. the wiring is also correct followed the steps to the letter. and I don't know why it doesn't heat up. and I can't think of anything anymore. please appreciate your help

http://soliforum.com/i/?9XeUgMc.jpg

http://soliforum.com/i/?Mo3NVzB.jpg

http://soliforum.com/i/?foctKJ8.jpg

video
https://www.youtube.com/watch?v=FeqI3Hv4t_c

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: the thermistor does not heat HEEEEELP!!! :(

Why is there a connection to pin 8 on the PID while the diagram does not show one.?

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by maikol_117

  • maikol_117
  • Newbie
  • Offline
  • Registered: 2020-07-10
  • Posts: 4

Re: the thermistor does not heat HEEEEELP!!! :(

in another forum someone indicated that a bridge had to be made between pin 8 and 9 but it still didn't work

4 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: the thermistor does not heat HEEEEELP!!! :(

Yes, the pin 8/9 jumper is needed.

Your kit is not working because you have connected the thermocouple incorrectly, leading the PID controller to think the temperature is negative.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

5 Reply by maikol_117

  • maikol_117
  • Newbie
  • Offline
  • Registered: 2020-07-10
  • Posts: 4

Re: the thermistor does not heat HEEEEELP!!! :(

it worked for me thank you very much