Request: QuickGuide for Update NTAG213.exe and NTAG Edit Tool.exe?

Hello

Their are many ways to get to Rome!

This thread started in 2016, as the software was not so sophisticated to read/write the Tags. In the mean time their are a lot of firmware changes!

I got my Arduino & PN532 working after weeks, because many info where not 100% accurate. So for me, my Arduino Nano & PN532 works with;
1) Update NTAG213.exe (from cgrillo). Was difficult and I tried it on Original & Clone Arduino's. Installing the .hex with Xloader.exe and the Devicename: Uno(ATmega328).
(Choosing The Nano(ATmega328) as device doesn't load the .hex for me :-( I have 100% no UNO ?!?
2) NTAG Edit Tool 1.40 (from Modfreakz). Works from Scratch

So now I have the equipment to edit my TAGS, but I thought I would be easier to edit the Tags with one of this software. Is their someone who could describe to exact procedure to create a working TAG for my "da Vinci mini". A kind of QuickGuide for Dummies ;-)
I read all these 750 posts in this thread and dozen in other post but I can't find the way to Rome :-(

Some people tell you can generate a TAG easy by clicking the button, other told you need a password to generate a Pack. But because of the evolution of the Software/Firmware I have still no idea what is running properly with the actual Firmware of the Summer of 2020

Also I have no idea I need to block the connection from XYZPrint to talk home? Maybe it was in the past so, but is it stlll actual. With my Original Reel & TAG I often prints a figure without do an login at the homepage of xyzprinting.com

So what are the ways to work in 2020?

Maybe someone could write 2 short QuickGuides, 1 for Update NTAG213.exe and 1 for NTAG Edit Tool 1.40 ?

p.s. I found also a Version EEPROM Edit Tool 1.45 ?!? Is this Tool a Editor for both the Tags of the Mini & the Eeprom of the larger XYZ 3D Printers. For me it does the same as the NTAG Edit Tool 1.40 when editing my Paperchips or Original TAGS
http://www.soliforum.com/topic/18368/ee … ioproplus/