Topic: Da Vinci Mini / Firmware
Hi,
My new Da Vinci mini has the Firmware 1.1.7.
I use ntag213 to print with 3rd Filaments.
Can I update to Firmware 1.3.9 and use farther my ntag213 without Problems?
Thanks a lot.
(Sorry for my bad English)
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → Da Vinci Mini / Firmware
Hi,
My new Da Vinci mini has the Firmware 1.1.7.
I use ntag213 to print with 3rd Filaments.
Can I update to Firmware 1.3.9 and use farther my ntag213 without Problems?
Thanks a lot.
(Sorry for my bad English)
If your machine is working, why do you need to update? Never update unless you have to or need a feature in an update.
Yes, it's working.
But the Firmware is very very old.
I think many Bugs were in it.
A new one, better performance, more combatibily...
Isn't this right ?
Hello
I made the same mistake! I wouldn't suggest to update to 1.3.9. I was on 1.3.3 and since I have the latest version is installed, every second print has an error 0061. So leave it as it is.
Maybe you can install with the tools in this forum a version between 1.17 and 1.3.3, but never switch to 1.3.9
Gérard
Hi,
Thank you very much, then I would rather leave my old firmware on it ...
Take care off downgrading!
The Tags (also original) which works, will not work anymore after downgrading! If you have no tools to reprogram the Tags, take care. I lost my 3D printer!. None of the tools I have allowing reseting the Tags (even with Arduino Nano & PN532, only errors on Windows 7)
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → Da Vinci Mini / Firmware
Powered by PunBB, supported by Informer Technologies, Inc.