1 Topic by javiercifuentes

  • javiercifuentes
  • Newbie
  • Offline
  • Registered: 2020-05-13
  • Posts: 4

Topic: sos urgente

good afternoon I would like to know 2 things a manual that specifies all the parts of solidoodle bombre of them to look for spare parts. and the second someone can help me I have tried to add support to the models but it does not accept changes. how to make a help with a manual or step-by-step video for this option to print with solidoodle. and if someone has used cure what would be the parameters to recognize the printer thanks

2 Reply by Tin Falcon (edited by Tin Falcon 2020-05-13 11:55:05)

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: sos urgente

First of all take a breather and slow down on hitting the submit button You posted the same question 4 times.
So Please go back and delete the redundancy.
1) i do not know if solidoodle ever published an illustrated parts bulletin. And do not know if you know this but they went bankrupt IIRC 2 years ago. Most parts are available as the machine is open source. and some need to be 3 d printed. Check for solidoodle on thingiverse.
Most here use repitier host that has cura and sli3r built in.
there are other software options.

There are many you tube videos that should help you.

Hope this helps

you need a model
then it needs to be sliced (CAM) then run the g code.

before that make sure the machine is set up and tuned.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by Kronikabuse

  • Kronikabuse
  • Kronikabuse
  • Member
  • Offline
  • From: Wi
  • Registered: 2014-08-03
  • Posts: 709

Re: sos urgente

www.printitindustries.com sells many parts for soildoodles

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

4 Reply by capibara

  • capibara
  • capibara
  • Newbie
  • Offline
  • From: Boston, MA
  • Registered: 2015-03-13
  • Posts: 8

Re: sos urgente

Yes, I have bought a few things from Print it industries for my SD4. If they had a bed sled or a heater for an SD2, I would buy it in a heartbeat!

SD4 with Lawsy carriages, GT2 belts & pulleys, hardened steel rods, MIC6 aluminum + Calidum bed, bearing mounted Y idler pulleys, E3D V6 hot end, Titan extruder, RUMBA board and Octoprint.
Stock SD2 with broken heated bed wood sled

capibara's Website