1 Topic by OldRadioGuy

  • OldRadioGuy
  • Newbie
  • Offline
  • Registered: 2020-04-27
  • Posts: 3

Topic: Can't calibrate.

I recently built my Atlas 3D scanner and it just doesn't want to calibrate. Here's what the calibration card looks like on the scanner and on the screen:

http://soliforum.com/i/?hHbOGEn.jpg

http://soliforum.com/i/?UItKhnK.png

I've tried a bunch of different light amounts. My shop lighting is via LED tube type fixtures.

Here are my settings:

http://soliforum.com/i/?Kh8TTEz.jpg

Any ideas how to troubleshoot?

Thanks in advance,
Alan

2 Reply by OldRadioGuy

  • OldRadioGuy
  • Newbie
  • Offline
  • Registered: 2020-04-27
  • Posts: 3

Re: Can't calibrate.

Solved the problem. The card has to be considerably more than the 1" closer than center indicated in the doc.

3 Reply by hairu526

  • hairu526
  • Member
  • Offline
  • Registered: 2014-01-28
  • Posts: 494

Re: Can't calibrate.

I’m glad that you got it working and thank you for the feedback.  One inch is usually enough.  I’ll look into this issue more.

Uriah