1 Topic by Shadowspere

  • Shadowspere
  • Newbie
  • Offline
  • Registered: 2019-12-08
  • Posts: 2

Topic: Day vinci 1.0 pro control board replacement

When trying to find out why my extruder wasn't heating up and looking to test the right fuse, I shorted my board. It pops up as if the firmware was wiped, doesn't show up in my computer as connected and the fan runs at top speed. I believe the board is done and I just want to place it with one that do the same as the one I currently have but maybe better.

I have a day vinci pro 1.0 with laser optional attachment. ( appears to use the same board as a 3 in 1)

Any help or suggestion would be appreciated attached is a photo of my control board.

2 Reply by Shadowspere

  • Shadowspere
  • Newbie
  • Offline
  • Registered: 2019-12-08
  • Posts: 2

Re: Day vinci 1.0 pro control board replacement

http://soliforum.com/i/?AFHnkjz.jpg

3 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Day vinci 1.0 pro control board replacement

IMHO not a whole lot of user replaceable parts. Likely the only replacements available is from someone who upgraded to an open source board. Or you can purchase a opensource board but you will not have the 3 in 1 capability.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura