1 Topic by creatorgirl13

  • creatorgirl13
  • Newbie
  • Offline
  • Registered: 2019-11-05
  • Posts: 8

Topic: opinions on carbon fiber 3d printing?

been doing some research on some filaments and need some help. I came across multiple resources and this one explains it the best, do you guys agree that carbon fiber is good for 3d printing? if so, what kind of pieces? thanks yall - creatorgirl

https://visionminer.com/blogs/news/carb … d-printing

2 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: opinions on carbon fiber 3d printing?

here is the thing.. the fibers are chopped up so small in order to go thru a nozzle, you gain pretty much none of the advantages of the material.

and it is not any lighter than standard materials are either.. in fact, it is heavier.

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

3 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: opinions on carbon fiber 3d printing?

It is also very abrasive. It will destroy a brass nozzle in modern time. I am also sure there will be particulates released that could be very damaging to breath.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

4 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: opinions on carbon fiber 3d printing?

bottom line it is good if you need a really stiff part . Other choices are better for strength.

here is a good review of one of the better brands.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura