1 Topic by Murph

  • Murph
  • Murph
  • Newbie
  • Offline
  • From: UK
  • Registered: 2019-07-27
  • Posts: 9

Topic: Don't fear the skinny

I made some pretty bad PETG last night that was lumpy and 1.0 - 1.1mm thin.
I was about to toss it when I thought 'I wonder how long it would print for before it fails'.
So I cranked up the flow in Cura to 150% and to my surprise it printed this.

http://soliforum.com/i/?Tekv99b.jpg

The striping is due to me experimenting with different amounts of Masterbatch.

Anycubic i3 Mega
Anycubic Chiron
Filastruder
Mahor XYZ Pellet Extruder Head

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Don't fear the skinny

Seems like you could have just reset your filament size. More than one way to skin a cat or set slicer settings. either way looking good.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura