1 Topic by printingdevices

  • printingdevices
  • Newbie
  • Offline
  • Registered: 2019-04-21
  • Posts: 4

Topic: What about to NFC eeprom exchange

First of all sorry if its already posted, i was finding but i didnt find it, the idea is simple, we all have the same trouble XYZ is selling 3d printers without warning about filaments, that just works with the original, in my case in my country there is no existence in the market  (original PLA filament), and i have the 3d printer as an ornament (also restricted international purchases).
Back to the topic, what about to exchange the eeprom (just software) between original ones, i mean, i give you my eeprom tables and other people gives the other eeproms, it is no posible to exchange the same in the same printer coz its saved, the filament already used, but if i send my memory eeprom without being finished other people can use it in other eeproms and could work, of course if you have your software blocked to internet, how the machine knows if that eeprom was bought for you or other people.

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: What about to NFC eeprom exchange

You are likely a day late and a dollar short on this idea. As this project of exchanging tags was abandoned months ago.
look here the second post down you simply buy blank generic tags and then program them with an android phone this makes the idea of mailing them obsolete.

look her the second sticky thread and you may want o read this whole section

http://www.soliforum.com/forum/32/xyz-p … acks-mods/

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by carl_m1968 (edited by carl_m1968 2019-04-22 01:31:12)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: What about to NFC eeprom exchange

Tin Falcon wrote:

You are likely a day late and a dollar short on this idea. As this project of exchanging tags was abandoned months ago.
look here the second post down you simply buy blank generic tags and then program them with an android phone this makes the idea of mailing them obsolete.

look her the second sticky thread and you may want o read this whole section

http://www.soliforum.com/forum/32/xyz-p … acks-mods/


He failed to specify which printer he has. If he has a 1.0, 1.0a, Aoi, they use an EEPROM in the cartridge which is what I think he is talking about. The issue is even if we exchange, the amount left in the cartridge is still written to the EEPROM by the machine so it will still show as an empty or low cartridge when it is put into another machine. These machines listed do not use RFID but instead an physical 3 pin connection.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.