https://www.ctcprinter.com/product_detail.php?ProId=16
The CTC machines are clones of Makerbot machines. They use a controller which is a clone of the mighty board. As such they run on software called ReplicatorG (http://replicat.org/) or RepG for short. They will also work on Makerbots official software (https://www.makerbot.com/3d-printers/ap … /download/) and the not free Simplify3D. Sadly CTC chose a not open source route for many of their machines.
That all being said there should be a memory card with the machine that has the software on it.
Accessories for FDM 3d printer
1. 3D printer
2. Power Line
3.USB Date Cable
4.Toolkit
5.SD card
6.Printer makerbot
7.Hanging material column
Also Marlin will not work on these boards. If you want a bit more control you can flash them with Sailfish but take note of all of the firmware settings as they will be zeroed out after the flashing and need to be set by you.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.