1 Topic by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Topic: XYZPrinting Davinci 1.0 titan aero mod

Hi there was wondering if anyone has attempted a titan aero mod

was considering a e3d v6 mod until I saw this with the shorter hot end in theory would be a better fit
and not lose any z axis

any thoughts on this ?

2 Reply by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Re: XYZPrinting Davinci 1.0 titan aero mod

Has anyone try to attempt the titan aero mod yet ?

3 Reply by DannyG72

  • DannyG72
  • Newbie
  • Offline
  • Registered: 2017-06-16
  • Posts: 1

Re: XYZPrinting Davinci 1.0 titan aero mod

I am planning on putting a titan aero in my 1.0a in the coming week, I will keep you posted. I have designed a theoretical carriage to use but I will most likely need to reprint it once I have the titan aero.

4 Reply by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Re: XYZPrinting Davinci 1.0 titan aero mod

that would be cool

5 Reply by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Re: XYZPrinting Davinci 1.0 titan aero mod

have you had any luck ?

6 Reply by smat (edited by smat 2017-07-03 18:32:30)

  • smat
  • Newbie
  • Offline
  • Registered: 2017-05-30
  • Posts: 3

Re: XYZPrinting Davinci 1.0 titan aero mod

I have Titan Aero in my Davinci 1.0 . Used stock carriage but had to mount the Volcano nozzle to have enough clearance for the nozzle to touch the table.

7 Reply by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Re: XYZPrinting Davinci 1.0 titan aero mod

Have any pics
love to see it

Volcano nozzle longer or shorter than the stock aero ?

8 Reply by smat

  • smat
  • Newbie
  • Offline
  • Registered: 2017-05-30
  • Posts: 3

Re: XYZPrinting Davinci 1.0 titan aero mod

I have no idea if you'll be able to see anything, but here are some pictures.
Volcano is much longer than regular Aero nozzle.[http://soliforum.com/i/?bSCn29n.jpghttp://soliforum.com/i/?jDDPUBa.jpghttp://soliforum.com/i/?3Z0nozU.jpghttp://soliforum.com/i/?j9N4c1X.jpg

9 Reply by i0dine

  • i0dine
  • Newbie
  • Offline
  • Registered: 2017-05-17
  • Posts: 7

Re: XYZPrinting Davinci 1.0 titan aero mod

are you using the stock holes on the carriage ?
looks like the whole unit is moved up like the e3d v6 mods

10 Reply by smat

  • smat
  • Newbie
  • Offline
  • Registered: 2017-05-30
  • Posts: 3

Re: XYZPrinting Davinci 1.0 titan aero mod

All holes are stock. Didn't have to drill anything.

11 Reply by vladimirzhukov

  • vladimirzhukov
  • Newbie
  • Offline
  • Registered: 2016-02-29
  • Posts: 4

Re: XYZPrinting Davinci 1.0 titan aero mod

My attempt to create a replacement carriage for not-volcano hotend. https://www.thingiverse.com/thing:2473936

12 Reply by fiotogr06

  • fiotogr06
  • Newbie
  • Offline
  • Registered: 2019-02-04
  • Posts: 3

Re: XYZPrinting Davinci 1.0 titan aero mod

Hi guys did you change anything in the firmware for the filament motor?? I want to do the same customization and i saw that the filament motors are diferent on deg per step...