1 Topic by 2n2r5 (edited by 2n2r5 2019-01-26 23:18:34)

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Topic: M-Lok Cam system

It's been a while since I got to post something new on here.

What: Printed M-Lok mounting system

Why: I wanted to test out a way to do locking cam with 3D printed materials. I needed a way to attach a sling. While I wait for my actual mount to arrive, I took the opportunity to test out a new technique for printed fasteners. This is also my first attempt at using Autodesk fusion 360.

How:
Modeled using Autodesk Fusion 360
Printed at .15 mm layer heights with 65% infill using my Dremel 3D45
Support material is needed for the 3 slot sling attachment

Where: Here is a link to the Fusion 360 project
https://a360.co/2UhZ2je

Here are a couple quick photos
http://soliforum.com/i/?2OoGHhm.jpg
http://soliforum.com/i/?yA6PwsP.jpg

Here is a quick video showing assembly.

Post's attachments

M-Lok Nut.stl 195.69 kb, file has never been downloaded. 

Mlok-3-slot span.stl 30.94 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: M-Lok Cam system

Cool project, nice to see you back around these parts.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: M-Lok Cam system

Thanks, let's see how long I can stay this time. tongue

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website