1 Topic by duongtn34

  • duongtn34
  • Newbie
  • Offline
  • Registered: 2018-09-18
  • Posts: 2

Topic: Why does heater now turn off?

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater. 
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanks

2 Reply by Kronikabuse

  • Kronikabuse
  • Kronikabuse
  • Member
  • Offline
  • From: Wi
  • Registered: 2014-08-03
  • Posts: 709

Re: Why does heater now turn off?

Check program finish script

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

3 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: Why does heater now turn off?

Within RH, go to Slic3r Configuration...under Settings/Printer Settings/General, uncheck the box that says "Has heated bed:"

This should disable the script that shuts the bed heater.

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

4 Reply by Ski52 (edited by Ski52 2018-09-18 20:22:38)

  • Ski52
  • Ski52
  • Member
  • Offline
  • From: Florida USA
  • Registered: 2013-10-23
  • Posts: 332

Re: Why does heater now turn off?

Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

Ender 3 Pro

5 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Why does heater now turn off?

Ski52 wrote:

Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

Please post your END G-code.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

6 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: Why does heater now turn off?

Ski52 wrote:

Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

I thought this sounded familiar:
Yes, it was your original post verbatim:
http://www.soliforum.com/topic/17380/wh … -turn-off/

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!