1 Topic by mrmex05

  • mrmex05
  • Newbie
  • Offline
  • Registered: 2017-10-13
  • Posts: 2

Topic: 3rd party resin Photocentric with XYZ nobel 1.0

I just got my nobel 1.0 and with my frist prints I chose to use a 3rd party resin from photocentric. It's a bottle of the clear hard uv resin. My prints are coming out okay but they have horizontal lines on the surface. I added some pics of 2 different prints at .05 microns and one at .025 microns. I added a layer of paint so you can see the lines easier in the pics. I don't know what variables to adjust in the professional mode to start to fix this problem. Any help would be appreciated.

http://soliforum.com/i/?DVqMlMN.jpg

http://soliforum.com/i/?7iGaquW.jpg

In the professional mode this is the only information they provide to attempt to adjust variable to solve any issues that come up with trying to calibrate the printer for the 3rd party resin.

https://drive.google.com/file/d/145_A-T … sp=sharing

im sorry if there is anything wrong with my post. im new to this forum but i have been following it for a long time now because the community here is outstanding. thank you for your time!

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: 3rd party resin Photocentric with XYZ nobel 1.0

It looks to me like a hardware issue we refer to as Z wobble. Your build plate is moving back and fourth during the build. This is most likely caused by a bent/warped Z screw or guide.

If you can manually home or move the Z axis through the host then make it move from min to max or max to min and watch the plate is it moves. There should be no side to side or back to front movement.

If there is I would be discussing an exchange with the people you bought it from as there is no easy fix for these types of printers when they have this issue.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by Redandrew6

  • Redandrew6
  • Newbie
  • Offline
  • Registered: 2018-08-17
  • Posts: 1

Re: 3rd party resin Photocentric with XYZ nobel 1.0

I know this post is a little old but is there any chance you could post the config settings you used for the resin? Thanks!