Topic: Help!! Thermistor error (M999) after Davinci 1.0a Upgrade to E3d V6!
I decided to give my Davinci 1.0a an upgrade by swapping to an E3d V6 hotend, including the thermistor that comes with it (I flashed my printer to Repetier .92.10M if that helps). After plugging everything back in it kept saying "fatal:Heater/sensor failure Printer stopped and heaters disabled due to this error. Fix error and restart with M999." I made sure that the tempsensor value was set to 8, and even plugged in the original thermistor to see if I had just received a dud, but no dice. I thought that it might just need a reboot so I cycled the power, but when I did I noticed that the thermistor would read -20, and then quickly go back to 'def'. I don't know what to try next, but if you have any insight on the matter, feel free to share!