1 Topic by 503939358

  • 503939358
  • Newbie
  • Offline
  • Registered: 2018-05-10
  • Posts: 4

Topic: Is this Nema 17 stepper motor a good choice for my Rostock MAX v1

I met across this nema 17 stepper motor 17HS19-2004S1 https://www.omc-stepperonline.com/hybri … S19-2004s1 online when I want to replace stepper motor in my Rostock MAX v1  to pair with my Titan Extruder.  Not sure whether it has enough power. Have someone tried this motor and give me some advice? Thanks in advance.

Post's attachments

17HS19-2004S1-stepperonline.png 105.88 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by Tin Falcon (edited by Tin Falcon 2018-05-17 23:57:24)

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Is this Nema 17 stepper motor a good choice for my Rostock MAX v1

I see no reason it would not work. It is a run off the mill Chinese stepper 1.8 deg step angle and 59 Ncm of torque.
No experience with this particular product.
the titan is geared . I assume a bowden drive setup  ?
You will need to fabricate a spacer plate mm thick to make the gears line up.
If you can believe the specs it is overkill for an extruder motor.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura