1 Topic by dubbsd

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Topic: I found a good acitone storage container

If you are printing on kapton tape and use acetone to clean it I found a spill proof container.
after I spilled a pint in the laundry room and had to replace the tile.

https://www.zoro.com/justrite-dispensin … gKdz_D_BwE

Ultimaker S3.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: I found a good acitone storage container

I've never had an issue with the container it comes in. But then I only ever use it over the sink just in case.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by dubbsd (edited by dubbsd 2018-01-12 19:07:06)

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Re: I found a good acitone storage container

I bumped a small can of it while I was cleaning the Printer bed. It rolled under the bench and before I could get it half of was on the floor. ( my wife was livid ) it happened over Christmas vacation I had to re-tile the laundry room floor I still hear about it every time I run the printer. she said she would actually prefer I did my printing outside. NOT GONA HAPPIN.

Ultimaker S3.

4 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,322

Re: I found a good acitone storage container

https://www.thingiverse.com/thing:953990

https://cdn.thingiverse.com/renders/16/54/15/5f/d4/desk_tidy_preview_featured.jpg

https://www.3dfilemarket.com/downloads/ … il-holder/

https://www.3dfilemarket.com/wp-content/uploads/IMG_7005-1024x1024.jpg

There are many different design like this, print with PLA, put your container and other small item like screw driver stuff in different unit. It reduce risk of spill and keep printer area organized. You can also print some nice design desk organizer or pen holder for your wife to smooth things out.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1