1 Topic by Landin81

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Topic: M105

Installed repetier on my da vinci 1.0A.
using simplify3d.

I finaly had some nice prints, but suddenly when connecting to the machine it start to send m105 code and nothing happens, no temperature showing in s3d =/

Anyone know what the problem can be?

Attempting connection at \\.\COM26...
  Connected to machine!
SENT: T0
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: M105

For one why are you on COM 26? Some programs have issues with COM ports higher than 5. Not sure why but I remember reading this on a printer related post.

Is COM 26 even the correct port? I trust you already tried the usual of unplugging all the USB and rebooting the computer and printer. Also make sure you are using a direct connection and not a hub. If the hub is powered it might be OK but using hubs with 3D printers is not advised.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by Landin81 (edited by Landin81 2015-11-05 15:36:04)

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Re: M105

Im not sure why, and now I have change the port to one in the back and now it says com29 insted.

Its connected, I can move all axsis from s3d.

This is how it looks in my tree:
http://soliforum.com/i/?Wm7mRJA.png


Hmm. When I go in to change the port, it says that the ports are used =/

I know that this has something to do with the printer =/

http://soliforum.com/i/?iewtndA.png


EDIT: So now I have clear the regeditkey and the printer is now at port5. But still only M105 with no respons..


EDIT: Reinstalled the USB to serial driver and changed to a new cable, seems to work, getting codes back from printer.
BUT: If having the box on both bed and extruder for the "wait for temperature controller to stabilize before build" checked, only the bed will heat.

And now I unchecked the box for the bed and extruder starts to heat up. But when heated up, the printer restarted itself..=/

And when trying to reconnect, I get the M105 without any respons again. GHHAAAAAAAA

EDIT: Everytime this happens, I can delete the Arduino DUE driver and reinstall it, than it works, for now. I have to do some prints and see if its F***ing up again.

Isnt there a way to upload the build to the printer, so that my computer dont need to stay connected to the printer during the build?

4 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: M105

Once you install Repetier you can no longer disconnect or turn off the computer. It prints now using a live stream. The only other choice would be to put the SDcard on an extension cable then you could print from the SDcard.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

5 Reply by Landin81

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Re: M105

Ok..

So, I found the problem, everytime I shut off the printer, or if the S3d have been connected to the printer and I close the program. I need to reinstall the arduini due drivers to the printer to get it to work again.. I dont know what to do about this =/

6 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: M105

Landin81 wrote:

Ok..

So, I found the problem, everytime I shut off the printer, or if the S3d have been connected to the printer and I close the program. I need to reinstall the arduini due drivers to the printer to get it to work again.. I dont know what to do about this =/


I bet you are running Windows 10..?

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

7 Reply by Landin81

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Re: M105

carl_m1968 wrote:
Landin81 wrote:

Ok..

So, I found the problem, everytime I shut off the printer, or if the S3d have been connected to the printer and I close the program. I need to reinstall the arduini due drivers to the printer to get it to work again.. I dont know what to do about this =/


I bet you are running Windows 10..?

No im running windows 7 -64bit.

Also I installed everything on one of my other computer, and it connected fine, over and over again. =/

So now the problem is down to my computer =/

8 Reply by Landin81

  • Landin81
  • Landin81
  • Member
  • Offline
  • Registered: 2015-07-24
  • Posts: 66

Re: M105

Solved..

There was a conflict between some serial protocols.

After reinstalling windows everything works as it should smile

9 Reply by gobygoby

  • gobygoby
  • Newbie
  • Offline
  • Registered: 2015-02-19
  • Posts: 1

Re: M105

Landin81 wrote:

Installed repetier on my da vinci 1.0A.
using simplify3d.

I finaly had some nice prints, but suddenly when connecting to the machine it start to send m105 code and nothing happens, no temperature showing in s3d =/

Anyone know what the problem can be?

Attempting connection at \\.\COM26...
  Connected to machine!
SENT: T0
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105

I had this exact same problem.  To solve it I went to this website:

https://support.microsoft.com/en-us/hel … b-problems

Apparently there was a problem with the USB port and my laser printer?!?!   Once that was fixed, I was able to immediately connect to my Davinci 1.0 (Repetier 0.92, Simplify3D).