1 Topic by petra2201

  • petra2201
  • Member
  • Offline
  • Registered: 2013-05-16
  • Posts: 21

Topic: Solidoodle 2 replacement belts

I've searched the forums and haven't been able to find a good answer that's current. I have a solidoodle 2 and recently you guys helped breathe new life into it by fixing some layer skipping issues. It was working and I've been tweaking settings and dialing in to get better prints when my daughter decided to help me and pulled the y axis belt and ripped it. Where can I find a new one if possible?

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Solidoodle 2 replacement belts

IIRC  it is an mxl series belt
https://www.mcmaster.com/#timing-belts/=18zzmg0




http://wiki.solidoodle.com/solidoodle-specs

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Solidoodle 2 replacement belts

yes, solidoodle uses MXL timing belts.

I bought a 10m spool from ebay, i believe - more than enough to last me a while, even with two SD4s.

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

4 Reply by petra2201

  • petra2201
  • Member
  • Offline
  • Registered: 2013-05-16
  • Posts: 21

Re: Solidoodle 2 replacement belts

I really appreciate the help.