1 Topic by paramite12

  • paramite12
  • Member
  • Offline
  • Registered: 2013-01-19
  • Posts: 44

Topic: What kind of connectors does the solidoodle 3 use?

I'm replacing my extruder stepper with a 1/32 stepper and need to know what kind of connectors they use to attach to the board. I have been unsuccessful in finding any good information on it, just really vague stuff. Soliwiki definitely didn't help since the link it sends you to looks nothing like the connector that's actually on the stepper motor.
I'm not nearly as knowledgeable in electronics as I am with mechanical parts, so I don't really know what I should be looking for. Any help would be appreciated. Thanks.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: What kind of connectors does the solidoodle 3 use?

Its just a standard header with the correct number of pins. You could just buy a 20 pin header and cut it down to the rwo you need.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.