Topic: Filawinder Construction Troubleshooting
Hi all,
So I assembled a filawinder kit. I plugged everything in and it is not working. If the motor is plugged in and the servo is unplugged, the motor rotates 'normall' (or at a decent pace).
If I have everything plugged in both the motor and the servo will move forward in short bursts, approximatly 1 per second. See video: https://drive.google.com/file/d/0B7YEx5 … sp=sharing (ignore the sound)
As far as I can tell everything is plugged in correctly, and I used a multimeter continuity tester to verify all the buttons were working and that the signal is going to the input of the arduino.
I have also been unable to get the laser to do anything. I have been unable to get any behavior other than the two described above, regardless of the combination of buttons and switches pressed.
What should I try doing to get it working?
Thanks!