Topic: xyz da Vinci Jr v1.0 Temp hex schema
I'm searching how I can tweak the temp of the extruder straight into the hex file.
Wanna know if it's possible or wich color are bind to high temp. (above 215-220)
Thanks
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → xyz da Vinci Jr v1.0 Temp hex schema
I'm searching how I can tweak the temp of the extruder straight into the hex file.
Wanna know if it's possible or wich color are bind to high temp. (above 215-220)
Thanks
Ok, it's my understanding that the tags for the JR have a maximum temperature of 210° C. If you need to go higher than that you have do modify the gcode os use software like Simplify3D. Thank you. This way anyone else with the same question has a place to find an answer.
Below are the color codes that are in page 08:
Black/Olivine 5A 50 45 00 191
Olivine 5A 50 45 00 191
GOLD 5A 50 46 00
GREEN 5A 50 47 00
NEON GREEN 5A 50 48 00
SNOW WHITE 5A 50 49 00
NEON YELLOW 5A 50 4A 00
BLACK 5A 50 4B 00 200
Violet 5A 50 4C 00 191
GRAPE PURPLE 5A 50 4D 00
PURPURIN 5A 50 4E 00
Clear Yellow 5A 50 4F 00
Clear Green 5A 50 50 00 210
CLEAR TANGERINE 5A 50 51 00
RED 5A 50 52 00
CYBER YELLOW 5A 50 53 00
TANGERINE 5A 50 54 00
CLEAR BLUE 5A 50 55 00
CLEAR PURPLE 5A 50 56 00
White 5A 50 57 00 210
CLEAR MAGENTA 5A 50 58 00
YELLOW 5A 50 59 00
Stock Nature 5A 50 5A 00 191
Full Nature 5A 50 5A 00
Ok, it's my understanding that the tags for the JR have a maximum temperature of 210° C. If you need to go higher than that you have do modify the gcode os use software like Simplify3D. Thank you. This way anyone else with the same question has a place to find an answer.
I reach 216 using this code and pull-in the temp probe near the fan
Bozotclown1970 wrote:Ok, it's my understanding that the tags for the JR have a maximum temperature of 210° C. If you need to go higher than that you have do modify the gcode os use software like Simplify3D. Thank you. This way anyone else with the same question has a place to find an answer.
I reach 216 using this code and pull-in the temp probe near the fan
Clear Green 5A 50 50 00 210
That looks to be Clear Green and the temp may have overshot. Also what layer were you checking the temp on. The first layer may be higher to help the PLA stick.
Now if you want ABS temps you can try and change the first two bytes of Page 08 to 5A 41. That should make the printer think it is printing ABS.
By the way, what hardware are you using to read your tag with. I am familiar with the software.
ledobs wrote:Bozotclown1970 wrote:Ok, it's my understanding that the tags for the JR have a maximum temperature of 210° C. If you need to go higher than that you have do modify the gcode os use software like Simplify3D. Thank you. This way anyone else with the same question has a place to find an answer.
I reach 216 using this code and pull-in the temp probe near the fan
Clear Green 5A 50 50 00 210
That looks to be Clear Green and the temp may have overshot. Also what layer were you checking the temp on. The first layer may be higher to help the PLA stick.
Now if you want ABS temps you can try and change the first two bytes of Page 08 to 5A 41. That should make the printer think it is printing ABS.
Thanks for the tip, Will tryin this and real soon.
My goal is to print wooden filament, so I want to keep a 215 temp constantly. If I can't I will buy a brand new printer.
Bozotclown1970 wrote:ledobs wrote:I reach 216 using this code and pull-in the temp probe near the fan
Clear Green 5A 50 50 00 210
That looks to be Clear Green and the temp may have overshot. Also what layer were you checking the temp on. The first layer may be higher to help the PLA stick.
Now if you want ABS temps you can try and change the first two bytes of Page 08 to 5A 41. That should make the printer think it is printing ABS.
Thanks for the tip, Will tryin this and real soon.
My goal is to print wooden filament, so I want to keep a 215 temp constantly. If I can't I will buy a brand new printer.
For wood you can try 5A 46 that is supposed to be for tree.
Bozotclown1970 wrote:Ok, it's my understanding that the tags for the JR have a maximum temperature of 210° C. If you need to go higher than that you have do modify the gcode os use software like Simplify3D. Thank you. This way anyone else with the same question has a place to find an answer.
I reach 216 using this code and pull-in the temp probe near the fan
I set mine to 5A 50 50 00, but my display never reaches that Temp, It always reads 189 degrees, and then starts printing, any idea's ?
You have entered the code for PLA and 189(190) is the correct temperature for that.
You have entered the code for PLA and 189(190) is the correct temperature for that.
Ah,.. so if i alter the code or first 2 bytes of page 8 it will think it's printing ABS ?
Is that how i get the Temp up ?
Bozotclown1970 wrote:You have entered the code for PLA and 189(190) is the correct temperature for that.
Ah,.. so if i alter the code or first 2 bytes of page 8 it will think it's printing ABS ?
Is that how i get the Temp up ?
That is my guess. I'm not sure if anyone has done it yet or not but that is what changing the first 4 bytes of Page 08 is supposed to do. As I mentioned, there are other ways. (gcode and software)
frank28 wrote:Bozotclown1970 wrote:You have entered the code for PLA and 189(190) is the correct temperature for that.
Ah,.. so if i alter the code or first 2 bytes of page 8 it will think it's printing ABS ?
Is that how i get the Temp up ?
That is my guess. I'm not sure if anyone has done it yet or not but that is what changing the first 4 bytes of Page 08 is supposed to do. As I mentioned, there are other ways. (gcode and software)
Interesting, will give it a try next time i reset my Tag & see if it changes the Temps settings.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → xyz da Vinci Jr v1.0 Temp hex schema
Powered by PunBB, supported by Informer Technologies, Inc.