1 Topic by viperz28

  • viperz28
  • Member
  • Offline
  • Registered: 2014-05-22
  • Posts: 122

Topic: Bed Plate Screws Loose

I was adjusting my bed when I noticed one of the screws was spinning, after disassembling the bed I found the screw that connects under the bed was loose. Anyone else have this issue? I was thinking about super glueing it on.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Bed Plate Screws Loose

I glued mine.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by viperz28

  • viperz28
  • Member
  • Offline
  • Registered: 2014-05-22
  • Posts: 122

Re: Bed Plate Screws Loose

carl_m1968 wrote:

I glued mine.


super glue?

4 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Bed Plate Screws Loose

Yep super glue..

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

5 Reply by Telemachus (edited by Telemachus 2016-05-30 15:16:01)

  • Telemachus
  • Member
  • Offline
  • From: Riverside, CA
  • Registered: 2016-01-19
  • Posts: 289

Re: Bed Plate Screws Loose

My right side screw has done the same. Can you get to the spot to glue it by lifting the glass up and out?

Da Vinci 1.0a.  Repetier 0.92.  E3D V6.  Titan Extruder.  Sllic3r.  Octoprint on Raspberry Pi B+.

6 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Bed Plate Screws Loose

Telemachus wrote:

My right side screw has done the same. Can you get to the spot to glue it by lifting the glass up and out?

Nope the bed has to be removed by taking out the leveling screws and flipped over.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

7 Reply by Telemachus (edited by Telemachus 2016-05-31 08:16:27)

  • Telemachus
  • Member
  • Offline
  • From: Riverside, CA
  • Registered: 2016-01-19
  • Posts: 289

Re: Bed Plate Screws Loose

Worked great thanks.

In my case the screw just needed to be tightened.

Da Vinci 1.0a.  Repetier 0.92.  E3D V6.  Titan Extruder.  Sllic3r.  Octoprint on Raspberry Pi B+.