You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Electronics & Hardware → Z axis not homing?
Hi just got done building a new M Prime one printer and setting up all of the endstops and all.
All is good but the Z axis will do nothing If I hit the z home button in repetier? the Z will move using the up and down arrows in repetier. It is probably something simple
If the other axes home properly, double-check the endstop switch wiring...
Hi yes. all work well but Z. z end stop also works just will not move when I hit the home button?
With the carriage (and Z) away from all endstops, enter M119 into the command line...what is the response below?
open on all of them
Very odd indeed...which motherboard / firmware is it running?
ramps 1.4 with marlin. I see that the Z axis will not go below 0 in repetier. Not sure why that is?
number goes up just in the odd case you didnt know
confused. I can not get it to move at all when hitting the home button.
In RH Config/Printer Settings/Printer Shape Tab; is Home Z set to Min? As well as your print area Height at (whatever your machine is supposed to be)?
No matter where the z is located that is
Just out of curiosity, what happens when you hit the "Home All Axes" button?
it works if I hit home all.
Wow...so maybe it's a problem with RH? Beyond that I'm stumped!
Now I can not get manual control to work at all? Not sure what is going on
Hmm I just completed a Folger tech prusa I 3 build I am having similar issues with my x axis.
Tin
Hmm I just completed a Folger tech prusa I 3 build I am having similar issues with my x axis.
Tin
SoliForum - 3D Printing Community → Electronics & Hardware → Z axis not homing?
Powered by PunBB, supported by Informer Technologies, Inc.
