Topic: Albedo
my last bust based on a character from 'Overlord' anim.
easy print , no support needed, can be printed in 2 and half hours if you set the scale to x0.5
free here : ALBEDO
- wardjr
- Moderator
- Offline
Re: Albedo
As always, fantastic work!!!
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
- ggunners
- Member
- Offline
Re: Albedo
Awesome design ysb. And I love the hair. 
SD2 Expert stock, ABS fume fan,
XYZ DaVinci 1.0 stock ABS, Simplify3D
QUBD Two-Up PLA, new 3D printed X gantry, Y idler, flex z coupler, extruder mount, E3D Lite
XYZ DaVinci 1.0 stock ABS, Simplify3D
QUBD Two-Up PLA, new 3D printed X gantry, Y idler, flex z coupler, extruder mount, E3D Lite
4 2015-12-01 15:39:43 (edited by ysb 2015-12-01 15:43:32)
- ysb
- Member
- Offline
Re: Albedo
thank you.. i just decided to use more deeply the software 3d-coat, and it's a lot easiest to work with (for me) than with Zbrush... the last version is very nice, with a module dedicated to 3d printing, AND it can use my Space navigator 3d mouse that zbrush didn't like... and the price is better (380$ full pro 3d-coat (even 99$ for student..) vs 800$ for zbrush..)
5 2015-12-29 22:51:52 (edited by ysb 2015-12-29 22:52:29)
- ysb
- Member
- Offline
Re: Albedo
now free for a limited time at my primary download base : www.fantasygraph.com/item/albedo
happy holidays
- wardjr
- Moderator
- Offline
Re: Albedo
Gotta say, I really like your style!!!
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: Albedo
Wow! Very nice. What material did you use? The resolution is amazing.
If you build it they will come. Then they will make fun of it, tell you it's not worth doing and go home and try to copy you.
If a picture is worth a thousand words then being there is worth a thousand pictures.
(2) Stock Makerbot Z18s, Filastruder w/Melt Filter, Filawinder, Autodesk Inventor Design Suite 2014 .........so far.
If a picture is worth a thousand words then being there is worth a thousand pictures.
(2) Stock Makerbot Z18s, Filastruder w/Melt Filter, Filawinder, Autodesk Inventor Design Suite 2014 .........so far.
8 2016-01-01 15:38:22 (edited by ysb 2016-01-01 15:41:26)
- ysb
- Member
- Offline
Re: Albedo
natural ABS at 0.15 layer height (no postwork.. but i think a little acetone vapor bath can remove the last remaining layer glitch on the wings and the chest..) ... it's fantastic what a well calibrated printer can do without using ultra-supra-'never seen on earth'- low layer height 