1 Topic by petekitchin

  • petekitchin
  • Newbie
  • Offline
  • Registered: 2015-09-28
  • Posts: 2

Topic: Calibration item model for Atlas 3D scanner

Can anyone tell me where to download the stl file for calibration item model referred to in the "Getting started" instructions that come with the scanner kit from Murobo?   It is not included in the printables file.

2 Reply by holoped

  • holoped
  • Newbie
  • Offline
  • Registered: 2015-09-24
  • Posts: 5

Re: Calibration item model for Atlas 3D scanner

I have searched for this myself, with zero success so far. Emails to the creators go unanswered.

3 Reply by Skylinc

  • Skylinc
  • Newbie
  • Offline
  • Registered: 2015-03-19
  • Posts: 6

Re: Calibration item model for Atlas 3D scanner

If you guys are KickStarter backers then you can get a link with all the downloadables in update #24 (https://www.kickstarter.com/projects/15 … ts/1189896). If not, then I would recommend you have to wait for an answer from Uriah.

4 Reply by pirvan

  • pirvan
  • pirvan
  • Member
  • Offline
  • From: San Francisco
  • Registered: 2013-03-27
  • Posts: 1,797

Re: Calibration item model for Atlas 3D scanner

Have you searched this forum before asking ?

If you had, you would have found a few posts with alternative calibration devices.

To print or, 3D print, that is the question...
SD3 printer w/too many mods,  Printrbot Simple Maker Ed.,  FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.

5 Reply by petekitchin

  • petekitchin
  • Newbie
  • Offline
  • Registered: 2015-09-28
  • Posts: 2

Re: Calibration item model for Atlas 3D scanner

Thanks to all who replied.   Unfortunately, the calibration item is not included in the printables file.   Yes, I did search the forum before placing my question and I will now try the alternate calibration devices.

6 Reply by jeffkashinsky

  • jeffkashinsky
  • Newbie
  • Offline
  • Registered: 2015-04-02
  • Posts: 1

Re: Calibration item model for Atlas 3D scanner

If you are a backer, it is indeed in the printables file. Scroll down. It is the 4th item from the bottom.