Re: Post your best/fav print - no Yodas allowed!
out of 2 prints my best one so far
27 2013-04-19 17:00:09 (edited by Gordym 2013-04-19 17:00:45)
Re: Post your best/fav print - no Yodas allowed!
These prints will go on my daughter's wedding cake. Printed at .1mm resolution in white filament. I have a friend that will paint the detail after they are cleaned. I scanned them with a Kinect scanner, ran through netfabb studio and meshmixer to clean up the models, then printed. It took about 6 hours to print each figure. The taller of the two is about 3" tall.
SD2
E3D V6
MK5 V6
E3D V6
MK5 V6
- chuk
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Messing around with different ways of finishing. Not really into the acetone vapor stuff at the moment so I used sanding primer and sanded it to 2000 grit between finish coats. Printed with a .2mm resolution and it was not the best print to start with as there was a missed step about 3/8" from the bottom.
- Kuon
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
wow its hard to tell its printed with a solidoodle 
i really like your finish
i have tried the same thing but it did not work that well yet probably because i used to harsh sanding paper:)
Re: Post your best/fav print - no Yodas allowed!
chuk wrote:
Messing around with different ways of finishing. Not really into the acetone vapor stuff at the moment so I used sanding primer and sanded it to 2000 grit between finish coats. Printed with a .2mm resolution and it was not the best print to start with as there was a missed step about 3/8" from the bottom.
WOW! That is really nice!!! Great job!
...sativas are for smoking!
Re: Post your best/fav print - no Yodas allowed!
Here´s my favourite so faar and turned up good
Re: Post your best/fav print - no Yodas allowed!
this is my fav 
quite a few prints joined together, about 16 in total i think.
Re: Post your best/fav print - no Yodas allowed!
REALLY NICE!!!! Do you mind sharing the .stl for that mask??
...sativas are for smoking!
Re: Post your best/fav print - no Yodas allowed!
My first large print...
//Matte
35 2013-05-21 12:14:19 (edited by Gordym 2013-06-14 10:17:46)
Re: Post your best/fav print - no Yodas allowed!
My daughter's bachlorette party was this weekend. I was asked to help with the cake decorations. I printed the wine bottles (Pink is one of her wedding colors, Lamp shade (Green is her other color), and Toilet from http://www.thingiverse.com/thing:7555 scaled at 200%. the cake turned out good and she really enjoyed it.
SD2
E3D V6
MK5 V6
E3D V6
MK5 V6
Re: Post your best/fav print - no Yodas allowed!
Gordym wrote:
My daughter's bachlorette party was this weekend. I was asked to help with the cake decorations. I printed the wine bottles (Pink is one of her wedding colors, Lamp shade (Green is her other color), and Toilet from http://www.thingiverse.com/thing:7555 scaled at 200%. the cake turned out good and she really enjoyed it.
Hilarious!!!
...sativas are for smoking!
Re: Post your best/fav print - no Yodas allowed!
EFFalcon wrote:
this is my fav
quite a few prints joined together, about 16 in total i think.
Awesome! Been wanting to do this. I made a foam helmet that turned out pretty good, but since I got my printer I've been wanting to print one. I'm hung up on how to slice it up so that it will print, though.
If you could share your .stl's or even just post pictures of the individual parts, that would be greatly appreciated.
38 2013-05-25 12:13:11 (edited by Kuon 2013-05-25 14:14:28)
- Kuon
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
my latest completed print 
some of you might know this character its corporal heart from the timesplitters games
it consists of 6 parts glued together and she stands about 20 cm tall
i have not glued on the arms and weapon because im going to paint them first and thats easier to do when they are disconnected
- chuk
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Any chance of an imgur mirror? Dropbox link isn't working for some reason.
Kuon wrote:
my latest completed print
some of you might know this character its corporal heart from the timesplitters games
it consists of 6 parts glued together and she stands about 20 cm tall
i have not glued on the arms and weapon because im going to paint them first and thats easier to do when they are disconnected
- Kuon
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
- chuk
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Works great, looks great. For some reason dropbox links were a mess the other day. Have you cut all the raft away to see how well it stands on it's own?
42 2013-05-28 19:21:10 (edited by DesignerFred 2013-05-28 19:26:16)
- DesignerFred
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Very thin perfume bottle design mockup, on its way to my client.... :° )
Made in crystal clear PLA.... and light blue PLA... Great! top at 0.2, and bottle at 0.25... with first layers support only in Slic3r.
Bed 65 to 60° and Extruder at 195 to 190°
www.designerfred.fr before: Solidoodle 2 + E3D v6 now: MeCreator II and OLO 3D
Re: Post your best/fav print - no Yodas allowed!
My daughter's wedding was this past weekend. I printed the top of their wedding cake as posted earlier. Here are some pictures of the finished products.
A picture to color by...
The product directly off my printer.
Smoothed, painted and ready to go.
The project turned out great. I printed at .1mm resolution and the artist smoothed with a dremel, primed, and painted with acrylics.
SD2
E3D V6
MK5 V6
E3D V6
MK5 V6
- DesignerFred
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Great Job :° )
www.designerfred.fr before: Solidoodle 2 + E3D v6 now: MeCreator II and OLO 3D
Re: Post your best/fav print - no Yodas allowed!
creationblur wrote:
Puck wrote:This is my favorite so far.
Very nice! What layer height is this?
Sorry, didn't see this! It's .05mm. Funny thing is I can't get .2mm to work but .05mm usually comes out so well.
Re: Post your best/fav print - no Yodas allowed!
Woah I would really like to try the iron man helmet!
- neoblood3d
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
Rough but still cool
Re: Post your best/fav print - no Yodas allowed!
Nice work... but I fear you have a few nuts and bolts left over 
49 2013-06-26 20:53:06 (edited by cyberpete 2013-06-26 20:54:04)
Re: Post your best/fav print - no Yodas allowed!
Made another VW keychain thingy and this one turned out super
Looks really eatable, almost like a cake
50 2013-07-15 19:07:37 (edited by SorinMS 2013-07-15 19:25:28)
- SorinMS
- Member
- Offline
Re: Post your best/fav print - no Yodas allowed!
I've made an One Direction logo cheychain at my daughter request: http://www.thingiverse.com/thing:118414.
“The majority believes that everything hard to comprehend must be very profound. This is incorrect.
What is hard to understand is what is immature, unclear and often false.
The highest wisdom is simple and passes through the brain directly into the heart.”
(Viktor Schauberger)
What is hard to understand is what is immature, unclear and often false.
The highest wisdom is simple and passes through the brain directly into the heart.”
(Viktor Schauberger)