https://www.soliforum.com/topic/9916/led-strip-issues/ Sun, 15 Feb 2015 16:06:51 +0000 PunBB https://www.soliforum.com/post/85364/#p85364 Same here, used super glue to re-attach...

]]> Sun, 15 Feb 2015 16:06:51 +0000 https://www.soliforum.com/post/85364/#p85364 https://www.soliforum.com/post/85105/#p85105 Time for some guerrilla glue...it wont be going anywhere once that stuff dries

]]> Fri, 13 Feb 2015 16:39:33 +0000 https://www.soliforum.com/post/85105/#p85105 https://www.soliforum.com/post/85038/#p85038 Yep, I experienced exactly the same thing.   The first print I did with the lid and door closed the LED strip dropped right off.    I just taped mine back up for now.

]]> Fri, 13 Feb 2015 06:05:12 +0000 https://www.soliforum.com/post/85038/#p85038 https://www.soliforum.com/post/84945/#p84945 I didn't realize they'd used a stick-on LED strip...  yeah those will all end up drooping after a while from the heat.

]]> Thu, 12 Feb 2015 20:55:57 +0000 https://www.soliforum.com/post/84945/#p84945 https://www.soliforum.com/post/84928/#p84928 Mine was like this when I opened the box. The adhesive is just goo. For a temp fix I scotch taped it in place. I do not look forward to cleaning up the goo.

]]> Thu, 12 Feb 2015 19:40:22 +0000 https://www.soliforum.com/post/84928/#p84928 https://www.soliforum.com/post/84924/#p84924 So, here's a new one. I'd been printing with everything open for a while, and getting middling results. I decided to do some "all doors closed" prints to see how they turned out, and it's looking like I'm getting substantially the same results - with one exception. The LED strip's adhesive is degooping in the heat from the enclosed chamber, and the strip's falling off the mount. I can stick it back on, but still - it's seeming like Yet One More Thing To Worry About with this printer.

]]> Thu, 12 Feb 2015 18:59:04 +0000 https://www.soliforum.com/post/84924/#p84924