<![CDATA[SoliForum - 3D Printing Community — Layer alignment issues with Avatar IV 3D Printer]]> https://www.soliforum.com/topic/9720/layer-alignment-issues-with-avatar-iv-3d-printer/ Fri, 06 Mar 2015 16:28:43 +0000 PunBB <![CDATA[Re: Layer alignment issues with Avatar IV 3D Printer]]> https://www.soliforum.com/post/88581/#p88581 In the early Avatar printers the heated bed springs were a little weak. I suggest you purchase stiffer bed springs from a hardware store, also you may want to set the printer to 2 Shells instead of 1.

]]> Fri, 06 Mar 2015 16:28:43 +0000 https://www.soliforum.com/post/88581/#p88581 <![CDATA[Re: Layer alignment issues with Avatar IV 3D Printer]]> https://www.soliforum.com/post/84948/#p84948 To me, it looks like there's a shift in one of the axis. How are you printing this? When looking at the second photo, is the object's shown side towards the back of the back/front of the bed, or on the bed's sides?

]]> Thu, 12 Feb 2015 21:09:21 +0000 https://www.soliforum.com/post/84948/#p84948 <![CDATA[Layer alignment issues with Avatar IV 3D Printer]]> https://www.soliforum.com/post/83470/#p83470 I just bought my first 3D printer, an Avatar IV, from a Chinese manufacturer. I've been testing the printer for the past few days without enjoying much success in terms of layer alignment. There is an offset between each layer printed.

I'm trying to print the part shown on picture 3D Part.jpg.
The results are shown on the three other pictures.

I have been printing with PLA filaments. My printing settings are:

  • One Extruder

  • Extruder Temperature: 200°C

  • Hot Bed Temperature: 50°C (Glass covered by blue tape)

  • Object Infill: 10%

  • Layer Height: 0.27mm

  • Number of Shells: 1

  • Feedrate: 40mm/s

  • Travel Speed: 30mm/s

I would like to know what might cause this improper layer alignment and how I can fix it. Thank you!

]]> Thu, 05 Feb 2015 19:19:55 +0000 https://www.soliforum.com/post/83470/#p83470