<![CDATA[SoliForum - 3D Printing Community — Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/topic/9625/mac-program-to-print-on-da-vinci-10/ Sun, 01 Feb 2015 20:49:54 +0000 PunBB <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82787/#p82787 carl_m1968 wrote:

That would be the same one, you can upgrade or downgrade the flash or even use Repetier on it, they won't know as long as you put the latest or close to latest on it if you need to return it. It is not like a phone that flips a bit when you change the firmware.

Thanks, Do you know any tutorials that I could follow?

-Andrew

]]> Sun, 01 Feb 2015 20:49:54 +0000 https://www.soliforum.com/post/82787/#p82787 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82641/#p82641 That would be the same one, you can upgrade or downgrade the flash or even use Repetier on it, they won't know as long as you put the latest or close to latest on it if you need to return it. It is not like a phone that flips a bit when you change the firmware.

]]> Sun, 01 Feb 2015 01:34:48 +0000 https://www.soliforum.com/post/82641/#p82641 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82640/#p82640 carl_m1968 wrote:
AndrewMast wrote:
AndrewMast wrote:

Checking CraftWare out...

-Andrew

CraftWare does not work, but I have one question: (I know this is totally off topic, but..) How do downgrade my Da Vinci to 1.1J without voiding my warranty? smile

Thanks,
Andrew

Exactly which Da Vinci do you have?

I have the Da Vinci 1.0 that I purchased on December 1st. 2014

-Andrew

]]> Sun, 01 Feb 2015 01:15:44 +0000 https://www.soliforum.com/post/82640/#p82640 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82637/#p82637 AndrewMast wrote:
AndrewMast wrote:
scobo wrote:

I'm not aware of any that will allow you to control the printer without first changing to custom firmware.
There are plenty of slicers to choose from though such as Cura, Craftware and Slic3r.

Checking CraftWare out...

-Andrew

CraftWare does not work, but I have one question: (I know this is totally off topic, but..) How do downgrade my Da Vinci to 1.1J without voiding my warranty? smile

Thanks,
Andrew

Exactly which Da Vinci do you have?

]]> Sun, 01 Feb 2015 01:13:23 +0000 https://www.soliforum.com/post/82637/#p82637 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82635/#p82635 AndrewMast wrote:
scobo wrote:

I'm not aware of any that will allow you to control the printer without first changing to custom firmware.
There are plenty of slicers to choose from though such as Cura, Craftware and Slic3r.

Checking CraftWare out...

-Andrew

CraftWare does not work, but I have one question: (I know this is totally off topic, but..) How do downgrade my Da Vinci to 1.1J without voiding my warranty? smile

Thanks,
Andrew

]]> Sun, 01 Feb 2015 01:08:25 +0000 https://www.soliforum.com/post/82635/#p82635 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82623/#p82623 AndrewMast wrote:
scobo wrote:

I'm not aware of any that will allow you to control the printer without first changing to custom firmware.
There are plenty of slicers to choose from though such as Cura, Craftware and Slic3r.

Checking CraftWare out...

-Andrew

I have checked all of the software out there, only S3D and Repetier Host along with stock will operate it directly. Nothing else works.

]]> Sat, 31 Jan 2015 23:36:41 +0000 https://www.soliforum.com/post/82623/#p82623 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82611/#p82611 scobo wrote:

I'm not aware of any that will allow you to control the printer without first changing to custom firmware.
There are plenty of slicers to choose from though such as Cura, Craftware and Slic3r.

Checking CraftWare out...

-Andrew

]]> Sat, 31 Jan 2015 22:35:32 +0000 https://www.soliforum.com/post/82611/#p82611 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82609/#p82609 I'm not aware of any that will allow you to control the printer without first changing to custom firmware.
There are plenty of slicers to choose from though such as Cura, Craftware and Slic3r.

]]> Sat, 31 Jan 2015 22:21:48 +0000 https://www.soliforum.com/post/82609/#p82609 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82607/#p82607 Sorry to bother you again, but is there any other programs?

-Andrew

]]> Sat, 31 Jan 2015 22:16:09 +0000 https://www.soliforum.com/post/82607/#p82607 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82597/#p82597 carl_m1968 wrote:
AndrewMast wrote:
carl_m1968 wrote:

Simplify 3D says they have a mac version and their site says the software works with this printer.

Ok, thanks!

scobo wrote:

I got an email back from them last night confirming they will give a full refund within 14 days of purchase if you have a problem and can't use it.

Thanks!

Do you have any other ideas beside Simplify3D?
scobo said to me that

scobo wrote:

The easiest way to bypass the filament counter in order to use 3rd part filament is to switch the firmware to 1.1.E and use the hacked xyzware software (which is way better than the official version anyway)...

Where could I get that software for mac?

Thanks,
Andrew

You buy it from their site. Just Google Simplify 3D. During your purchase you get to choose which version you need.


Ok, thanks!

-Andrew

]]> Sat, 31 Jan 2015 20:21:12 +0000 https://www.soliforum.com/post/82597/#p82597 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82596/#p82596 scobo wrote:

As far as I know, the xyzware open mod version is only available for windows, sorry.

Ok, to bad sad

]]> Sat, 31 Jan 2015 20:20:36 +0000 https://www.soliforum.com/post/82596/#p82596 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82595/#p82595 As far as I know, the xyzware open mod version is only available for windows, sorry.

]]> Sat, 31 Jan 2015 20:17:48 +0000 https://www.soliforum.com/post/82595/#p82595 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82591/#p82591 AndrewMast wrote:
carl_m1968 wrote:

Simplify 3D says they have a mac version and their site says the software works with this printer.

Ok, thanks!

scobo wrote:

I got an email back from them last night confirming they will give a full refund within 14 days of purchase if you have a problem and can't use it.

Thanks!

Do you have any other ideas beside Simplify3D?
scobo said to me that

scobo wrote:

The easiest way to bypass the filament counter in order to use 3rd part filament is to switch the firmware to 1.1.E and use the hacked xyzware software (which is way better than the official version anyway)...

Where could I get that software for mac?

Thanks,
Andrew

You buy it from their site. Just Google Simplify 3D. During your purchase you get to choose which version you need.

]]> Sat, 31 Jan 2015 19:58:56 +0000 https://www.soliforum.com/post/82591/#p82591 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82590/#p82590 carl_m1968 wrote:

Simplify 3D says they have a mac version and their site says the software works with this printer.

Ok, thanks!

scobo wrote:

I got an email back from them last night confirming they will give a full refund within 14 days of purchase if you have a problem and can't use it.

Thanks!

Do you have any other ideas beside Simplify3D?
scobo said to me that

scobo wrote:

The easiest way to bypass the filament counter in order to use 3rd part filament is to switch the firmware to 1.1.E and use the hacked xyzware software (which is way better than the official version anyway)...

Where could I get that software for mac?

Thanks,
Andrew

]]> Sat, 31 Jan 2015 19:55:38 +0000 https://www.soliforum.com/post/82590/#p82590 <![CDATA[Re: Mac program to print on Da Vinci 1.0]]> https://www.soliforum.com/post/82585/#p82585 I got an email back from them last night confirming they will give a full refund within 14 days of purchase if you have a problem and can't use it.

]]> Sat, 31 Jan 2015 19:20:38 +0000 https://www.soliforum.com/post/82585/#p82585