https://www.soliforum.com/topic/9528/major-newbie-workbench-apprentice-not-prnting/ Tue, 10 Feb 2015 23:53:31 +0000 PunBB https://www.soliforum.com/post/84569/#p84569 Thanks to update, Now the WB Apprentice is plugged into an APC UPS "600" Brand new (on sale at Office Depot now). The printers main problem is the WB apprentice printer setting is not usable, but the default setting starts to print and stops mid-print. The printer has come close to fonishing but will has not finished. Currently Dan from solidoodle is attempting to diagnose the problem, personally it would just be best to send it back and try another printer.

]]> Tue, 10 Feb 2015 23:53:31 +0000 https://www.soliforum.com/post/84569/#p84569 https://www.soliforum.com/post/82493/#p82493 Good stuff I am gonna give every suggestion a try and I'll post back with results, Thanks.

]]> Sat, 31 Jan 2015 01:26:43 +0000 https://www.soliforum.com/post/82493/#p82493 https://www.soliforum.com/post/82324/#p82324 the only way i was able to fix mine was putting the printing on its own wall socket with nothing else on it if i plugged in my computer to the same plug it would stop on every print the guys at Solidoodle told me i had a bad power supply so they are sending me a new one i put a 1500 APC on it to regulate the power and now i can print kind of LOL still cant get my prints to stick down

]]> Fri, 30 Jan 2015 03:10:59 +0000 https://www.soliforum.com/post/82324/#p82324 https://www.soliforum.com/post/82245/#p82245 As cpsmicahel said, check both your RH and Slic3r start codes for any temperature commands such as M109 or M190. My first guess would be that it is waiting for the extruder and/or bed to reach a certain temperature. Also check the temperatures in your Slic3r filament settings.

]]> Thu, 29 Jan 2015 16:49:59 +0000 https://www.soliforum.com/post/82245/#p82245 https://www.soliforum.com/post/82226/#p82226 Make sure in your gcode you do not have auto heating on it will stop if you go below the temperature

]]> Thu, 29 Jan 2015 15:14:23 +0000 https://www.soliforum.com/post/82226/#p82226 https://www.soliforum.com/post/82225/#p82225 I had the same problem I fix it by putting my printer on a ups backup by its self

]]> Thu, 29 Jan 2015 15:12:56 +0000 https://www.soliforum.com/post/82225/#p82225 https://www.soliforum.com/post/81934/#p81934 No, its not a laptop. Other info, two other Desktop computers with 4 gigs RAM, one win 7, one XP, have been used following the same practices, with no success.

]]> Tue, 27 Jan 2015 23:20:21 +0000 https://www.soliforum.com/post/81934/#p81934 https://www.soliforum.com/post/81781/#p81781 Is it a laptop? Maybe it's going into sleep mode.If so that can be corrected.

]]> Tue, 27 Jan 2015 02:04:07 +0000 https://www.soliforum.com/post/81781/#p81781 https://www.soliforum.com/post/81757/#p81757 Let me preface this by saying I don't know much about what I am doing. The workbench apprentice has never completed a print, but has gotten more than half way a couple of times. Now the printer is not printing, it probes the table nine times then stops, repetier is still working for a while, but after a while repetier locks up. When the repetier locks up, if the printer is turned off, repetier begin working again. My power is plugged into a new Belkin Surge protector, a brand new, 8 gig ram, intel Core I3, Windows 8 with no other devices plugged in and all power saving/ screen saver/ or time outs settings, are turned off. Repetier with Slic3r all programs Solidoodle recommends were downloaded from Solidoodle links and are being used. Now, what is the problem, what is missing, where are all the default settings? Any help would be greatly appreciated, if you would like a video that's not a problem and can link it to youtube.

]]> Tue, 27 Jan 2015 00:07:19 +0000 https://www.soliforum.com/post/81757/#p81757